Dead Inside So I Stay High DTF Transfer
Dead Inside So I Stay High DTF Transfer
Couldn't load pickup availability
Indulge your inner stoner with the Dead Inside So I Stay High DTF Transfer! This versatile transfer is a must-have for any 420 holiday, whether you're smoking weed or just want to rock some quirky attire. Simply press onto shirts and totes and let the good times roll!
Materials
Materials
Our direct to film DTF transfers can be used on 100% cotton, 100% polyester, cotton/poly blends, triblends, mesh, canvas, Lycra®, and spandex.
Pressing Instructions
Pressing Instructions
DTF Transfer Pressing Instructions
Important Note:
You must use a heat press with adjustable pressure.
The following machines will not provide the required pressure and will lead to poor adhesion:
- Auto-Presses (ex: HTVRONT Auto Heat Press)
- Handheld presses (ex: Cricut Easy Press)
- Household irons
✅ Using a commercial heat press is recommended for the best quality finished product.
Pressure: Heavy pressure (approximately 60 lbs)
Polyester: 270°F/6 seconds
Tri-Blend: 270°F/6 seconds
50/50 Cotton/Poly Blend: 275°F/8 seconds
100% Cotton: 300°F/8 seconds
Second Press
After peeling the film, press again for 5 seconds using your preferred finishing sheet - some examples include parchment paper, teflon sheet, kraft paper, a white cotton tee, or a textured sheet.
Troubleshooting Tip
If edges lift, your pressure is too low. Increase your pressure setting and repress.
Need Help?
We’re here for you!
Email us: info@flawlesstransfers.com
