Build Your Own UV DTF Gang Sheet
Build Your Own UV DTF Gang Sheet
Create custom UV DTF transfers designed for hard surfaces like coolers, drinkware, boats, wood, and acrylic. These durable transfers resist fading, scratches, and water damage—even surviving the dishwasher when needed. Build your own gang sheet by selecting your design and length (22.5" wide standard), and we'll print it on commercial equipment. Submit print-quality graphics at 300dpi minimum in PNG or PDF format for best results. Perfect for adding professional, long-lasting branding to any hard surface application.
TAT is 3 Business Days on UV DTF; If you order a UV DTF sheet alongside a regular DTF sheet, both items will be completed in 3 business days.
Materials
Materials
Our direct to film DTF transfers can be used on 100% cotton, 100% polyester, cotton/poly blends, triblends, mesh, canvas, Lycra®, and spandex.
Pressing Instructions
Pressing Instructions
DTF Transfer Pressing Instructions
Important Note:
You must use a heat press with adjustable pressure.
The following machines will not provide the required pressure and will lead to poor adhesion:
- Auto-Presses (ex: HTVRONT Auto Heat Press)
- Handheld presses (ex: Cricut Easy Press)
- Household irons
✅ Using a commercial heat press is recommended for the best quality finished product.
Pressure: Heavy pressure (approximately 60 lbs)
Polyester: 270°F/6 seconds
Tri-Blend: 270°F/6 seconds
50/50 Cotton/Poly Blend: 275°F/8 seconds
100% Cotton: 300°F/8 seconds
Second Press
After peeling the film, press again for 5 seconds using your preferred finishing sheet - some examples include parchment paper, teflon sheet, kraft paper, a white cotton tee, or a textured sheet.
Troubleshooting Tip
If edges lift, your pressure is too low. Increase your pressure setting and repress.
Need Help?
We’re here for you!
Email us: info@flawlesstransfers.com
